This is a decent 3 step instruction article outlining exactly how to retro fit your trike/bike with a Bafang mid drive motor. The Bafang is similar to my TSDZ2 except it utilises a cadence sensor as opposed to a torque sensor. Here…
eTrike FaceBook Group member Joe Duerr kindly gave me permission to post this in the hope it would help other members who might like to install a “reverse gear switch” on their trike. The mod will literally place a switch that will…
Well, if I do it say it myself, this little adapter idea worked a treat. I’d used XT60 connectors on my motor and both batteries and one battery (which does not have an on/off switch) liked to spark when connected. By using…
Having fitted XT60 connectors to both the motor and my two 48V batteries I’m finding that one battery likes to spark when being connected. Whilst not a great problem I rather wish I’d used the XT90S anti-spark connectors instead.. To attempt to…
I’m finding myself slipping down a tad in my seat on my QNT and it puts in a slightly annoying position, to such an extent that I find myself trying to push myself back up with my feet. So in an attempt…
Here’s a few pics from yesterday as I re-plugged the dual batteries on the QNT with XT60s. Soldering is fairly new to me and doing it in situ was not going to make things any easier. A small vice attached to an…
Several people have asked me about the headlights I have on my trike. They are actually very reasonably priced Chinese cree tech lights that I find are well made and work well and at 6000 Lumens they’re bright! They have 3 settings…
